8
2.
Lid snaps are designed to provide enough force to compress the
o-ring for a proper seal. Keep firm pressure against the lid snap
while lifting it away.
Lid Snap Lock
3.
Repeat with remaining lid snap(s).
4.
Remove the housing back.
Inserting the Camera
1.
Remove any lanyard or neck strap which may be attached to the
camera.
2.
Check to see whether the camera’s lens will fit through the port
opening of the housing. If not, the lens will need to be removed
from the camera body and reattached AFTER the camera body is
installed in the housing.
3.
Remove the camera mounting plate from the housing.
