26
Water enters the
housing
- Remove, clean and properly lubricate the main
o-ring.
- Look for hair, dirt, or foreign debris crossing the
o-ring seal.
- Reassemble the housing without a camera
installed and pressure test or take diving.
- Return housing to Ikelite for evaluation.
Problem
Solution
Pictures are too blue
or too green
- Add an optional color correcting filter to the
camera lens.
- Use custom (manual) white balance. Reset for
each working depth or when attaching a color
correcting filter to the camera lens.
- Add an external strobe.
- Move in closer to your subject when taking a
picture.
Customer Support
Please read the troubleshooting section of this instruction manual before
contacting Ikelite Customer Support.
Ikelite Underwater Systems
Service Department
50 West 33rd St.
Indianapolis, IN 46208 USA
Email: [email protected]
Phone: 317-923-4523
