10
STEP 4 - Installing Camera in the Housing -
continued
4. Using a coin or flathead screwdriver (preferred), secure the camera
Mounting Tray to the camera tripod mount,
Diagram B
. Tighten camera
firmly
to avoid movement on tray. The Mounting Tray attaches one way
with the Tray
Removal Screw to
the back of the
camera.
An additional
1/4-20-inch Tray
hole allows
attachment to a
land tripod stand.
Diagram B
Tray
Removal
Screw
Mounting Tray
5. Gently slide the camera with Mounting Tray back into the Mounting Plate
with the camera attached
Diagram C, page 11
. Make sure the hotshoe
wire is out of the way. Using your thumb, push against the Mounting
Tray until it stops sliding forward into the Mounting Plate. Give the Tray
an extra push to make sure it is properly seated all the way forward in
the Mounting Plate,
Diagram D, page 11
.
Diagram A
Mounting Plate
Mounting Tray
Tray Removal Screw
Pull to Remove
Mounting Tray
