26
Water enters the
housing
- Remove, clean and properly lubricate the main
o-ring.
- Look for hair, dirt, or foreign debris crossing the
o-ring seal.
- Reassemble the housing without a camera
installed and pressure test or take diving.
- Return housing to Ikelite for evaluation.
Problem
Solution
Pictures are too blue
or too green
- Use custom (manual) white balance when NOT
using an external strobe. Reset for each working
depth or when attaching a color correcting filter to
the camera lens.
- Move in closer to your subject when taking a
picture.
- Add an optional color correcting filter to the
camera lens.
- Add an external strobe.
Customer Support
Please read the troubleshooting section of this instruction manual before
contacting Ikelite Customer Support.
Ikelite Underwater Systems
Service Department
50 West 33rd St.
Indianapolis, IN 46208 USA
Email: [email protected]
Phone: 317-923-4523
