6
Travel and Storage
1.
Remove the camera from the housing for travel or storage.
2.
Check the main housing o-ring.
3.
Close and soak the empty housing in lukewarm fresh water. While
submerged, depress each button to flush out any salt or debris.
4.
Remove the housing from water and rinse with running water.
5.
Dry the housing with a clean, lint-free cloth.
6.
Store in a cool, dry place.
7.
Like regulators and other pressure-sensitive equipment, we recommend
careful care and cleaning along with annual replacement of the factory
seals.
Troubleshooting
Water enters the
housing
• Ensure the main o-ring is clean and lubricated
properly.
Buttons are Stuck
• Soak the housing in lukewarm fresh water. Depress
each button several times while the housing is
submerged.
• Apply lubricant to the button. Press several times to
distribute lubricant.
Button(s) do not
line up
• Ensure that nothing is preventing the camera from
going into the housing.
