2
Initial Camera Setup
-
Set camera mode switch to “Av” Aperture Priority.
-
Set DR Correction to “Off” and ISO to “80.”
-
Set White Balance to auto “AWB” and Frame to “Single Shot.”
-
Set Light Metering to “Center Weighted Avg.”
-
Set ND Filter to “ND Off”, and Still Image Aspect Ratio to “4:3.”
-
Set Image Type to “JPEG” and Image Size to “L.”
-
Set AF Frame to “1-point” and AF Frame Size to “Normal.”
-
Set Digital Zoom to “Off” and AF-Point Zoom to “Off.”
-
Set Servo AF to “On” and Continuous AF to “On.”
-
Set Touch Shutter to “Off” and AF-assist Beam to “Off.”
-
Set Review to “5 Seconds.”
-
In the Flash Settings menu, set the Flash Mode to “Auto.”
Set Shutter Sync to “1st-curtain.”
Set Red-Eye Correction and Red-Eye Lamp to “Off.”
Set Safety FE to “On.”
-
Set Spot AE Point to “AF Point” and Safety Shift to “On.”
-
Set Review to “4 seconds” and Review Info to”Off.”
-
Set Blink Detection to “On” and IS Mode to “Continuous.”
-
Set Control Ring Func. to “STD” Default Control Av.
-
Set Flash to forced ON (flash always fires) “ .”
Setup Notes:
If shadows are present, use two external strobes. Also, you can set
Shadow Correct to “Auto”, which will help to lighten shadowed areas.
Set Macro Mode to “On” when shooting very close subjects.
The camera does NOT operate with TTL “automated” flash when in the
“M” manual mode. “M” manual mode should NOT be used with the AF35
strobe.
