3
Initial Camera Settings
-
Insert and Format a high capacity memory card.
-
Set Date and Time.
-
Set REC Mode to “P” Program Auto.
-
Set ISO to “100.”
-
Set Still Image Size to “16M.”
-
Set Focus to “Center AF.”
-
Set Metering Mode to”Center.”
-
Set White Balance to “Auto.”
-
Set Flash to “On always use flash.”
-
Set Blink Alert to “Off.”
-
Set AF Illuminator to “Off.”
-
Set Red-Eye Reduction to “Off.”
NOTE:
If overexposure occurs when shooting close subjects, Adjust EV
setting and/or back away from the subject and zoom in.
External Accessory Lenses
An external wide angle conversion lens increases angle of coverage so
you can get much closer to your subject while still fitting everything in the
frame. By reducing the amount of water between the subject and your
camera lens, the resulting image will be more crisp and colorful.
- Attach 46mm threaded #6420.46 Ikelite W-20 and other lenses directly
to the front of the port.
- Attach 67mm threaded #6420 Ikelite W-20, Inon Type II and Epoque
lenses using the #9306.81 port adapter. This adapter may also be used
to attach 67mm threaded macro lenses.
- Attach bayonet style Inon macro or UWL-100 28AD, UWL-105AD and
UFL-165AD wide angle or macro lenses using the #9306.79 port adapter.
Moderate vignetting (shading in the corners) will be present in the widest
setting when using an external accessory lens. This effect can be
eliminated by zooming in slightly.
