8
Setting Up Your Strobe
Removing the Battery Pack
»
The battery pack is NOT waterproof when detached from the
strobe front.
»
Do not remove or lubricate the battery pack o-ring.
1.
Turn the Power Switch to the OFF position and place the strobe
face down on a flat surface.
2.
Slide the toggle lock out and flip up.
3.
Rotate the toggle lock counter-clockwise 90 degrees.
4.
Remove the Battery Pack from the strobe front.
OPEN
UNLOC
K
Charging the Battery Pack
»
Use only a compatible Smart Charger for NiMH Battery Packs.
Do not attempt to charge the pack with other chargers. Use
of an incompatible charger is a safety risk and may cause
irreparable damage to the pack.
»
Operation of this charger with battery packs other than those
intended is dangerous and could result in damage to the
battery pack or charger.
