9
Internal Tile Mount Dome –
Mounting
Hole Cutting Template:
&XWWKHEHORZSUR¿OHLQWRWKHWLOH\RXZLOOEHPRXQW
-
ing the Dome into.
Disassemble of Ceiling Mount:
1. Unclip the Cover Ring from the Ceiling Mount Dome.
2. Unscrew the Locking Screw, it is captive in the
Locking Ring and should not completely fall out.
3. Rotate the internal mechanism assembly anti-clock-
wise and remove it from the External Cover.
Installation :: Internal Tile Mount Dome :: Mounting
!
Installation - T
ile Mount Dome
Safety Note!
0DNHVXUHWKHSRZHUVXSSO\LVVZLWFKHGRIIEHIRUH¿W
-
ting the Internal Mechanism.
Locking
Ring
Cover
Ring
Locking
Screw
External Cover Mounting:
1. Mount the External Cover into the pre-cut tile using
the M4 Cavity Screws supplied
2. Connect the screw terminal block and BNC con-
nector as described in the Ceiling Mount - Electrical
Connection part of this Guide.
Fitting of Internal Mechanism Into External
Cover:
1. Insert the Internal Mechanism into the external
cover. Rotate clockwise until the mechanism moves
further in, then rotate clockwise further until the
mechanism stops turning and the Locking ring clicks.
2. Screw in the locking screw to stop the Internal
Mechanism from being un-screwed.
3. Clip on the Cover Ring.
Summary of Contents for PCS-400P Series
Page 1: ...PCS 400P Series Dome Installation Setup Guide ...
Page 2: ......