1
Safety Precautions
For safe and correct usage
DN-27466
Thoroughly read the “Safety Precautions” and the
operation manual before using the unit. Keep them
carefully after reading and use as ready reference.
Pictorial Symbols
The “Safety Precautions” and markings on the product
contain various pictorial symbols to assure the safety
use of the product and prevent an injury to you and
other persons as well as property damage.
As each symbol has the following meanings,
thoroughly under- stand them before using the unit.
Please note that some precautions may not be
applicable to the product that you purchased.
WARNING:
Indicates a potentially hazardous situation
that may arise due to improper handling
by taking no notice of this symbol and
could result in a serious injury or death.
CAUTION:
Indicates a potentially hazardous situation
that may arise due to improper handling
by taking no notice of this symbol and
could result in an injury or property
damage only.
[Note]
△
means a heads-up.
Examples of symbols
Symbol “ ” means a prohibited action.
The content of prohibited matter is mentioned
near or in the figure. (The figure on the left
side represents “Caution for disassembling”.
Symbol “ ” means a mandatory or directive
content. Practical precautions are shown in
the figure. (The figure on the left side
represents “Pull out power plug from plug
outlet.”)
１．．１
CAUTION
When using the unit:
Do not place a receptacle containing water or a
small metallic piece on the unit!
If water spills in the unit, a fire or electric shock
may be caused.
Do not use other power supply voltage than
specified!
A fire or electric shock may be caused.
Do not put a metal body or flammable material
into the opening of the unit!
Do not drop in such material!
A fire or electric shock may be caused.
Do not make alterations to the unit!
A fire or electric shock may be caused.
When installing the unit:
Do not set the unit in an unstable place!
It may drop or turn down, causing an injury.
Do not connect to any other equipment than
specified!
A fire or electric shock may be caused.
When fixing the unit, ask a professional
contractor!
When fixing the unit, do so in accordance with the
specified procedure; otherwise it may drop or
turn down, causing a fire, electric shock or
injury.
Especially when fixing it to the wall or ceiling,
be sure to ask a professional contractor.
When an abnormal state occurs:
If the unit produces smoke, gives out a foul smell
or produces an abnormal sound, turn off the
power switch immediately and pull out the power
plug!
If the unit is used as it is, a fire or electric shock
may be caused. Check that no smoke is
produced, and then contact the dealer or sales
representative.
If water or foreign matter enters the unit, turn
off the power switch and pull out the power plug!
If the unit is used as it is, a fire or electric shock
may be caused. Check that no smoke is
produced, and then contact the dealer or sales
representative.
If the unit is dropped or the case is broken, turn
off the power switch and pull out the power plug!
If the unit is used as it is, a fire or electric shock
may be caused. Contact the dealer or sales
representative.
If the unit fails to operate properly, turn off the
power switch and pull out the power plug!
If the unit is used as it is, a fire or electric shock
may be caused. Contact the dealer or sales
representative.
Do not use any damaged power cord (exposed
core, broken wire, etc.)!
If the unit is used as it is, a fire or electric shock
may be caused. Contact the dealer or sales
representative.
The copyright of the software made for this
product is in Ikegami Tsushinki Co., Ltd.
It forbids to reproduction, a change, and so on
about a part of this calligraphy or all without
