E-5
①
Lens fixing screws (elevation)
These are screws to fix the camera in the desired elevation position.
Fix these screws after setting the viewing position.
②
Vari-focal lens
Can be used with flexible angle of view using varifocal lens.
③
Switches for camera setup
Refer to Section 8 (Operating Procedure)
④
Test monitor output
Connect accessory MON.OUT output harness.
⑤
Power cable
This is a power cable. Non-polarity AC24V (AC 21.6V ~ 26.4V) or
DC12V has to be connected. Check the power voltage from the external
power supply before applying power to the camera.
* This installation should be made by a qualified service person and
should conform to all local codes.
⑥
Video Output cable (BNC)
This is the output of video signal. Connect this to a monitor or switcher.
⑦
Fixing holes (two key hole slots)
⑧
Dome Cover
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
