E-6
5-2. SETUP switches and their functions
The pushbuttons and their markings at left are provided on the back
of the camera.
Up Switch (U)
Used to select SETUP items (up and down).
Down Switch (D)
Right Switch (R)
Used to modify the settings.
Left Switch (L)
Enter Switch (E)
Used to enter and quit the setup mode and to save the settings.
* To enter the setup mode, hold down the E button longer than 2 seconds.
5-3. Entering the setup mode and its basics
5-3-1. SETUP MENU (Main menu)
Hold down the E button longer than 2
seconds, and the menu at left appears
onscreen. A highlighted item is now selected.
(1)CAMERA ID
Up to 24 characters can be displayed onscreen.
(2)LIGHT CONTROL The backlight compensation and spot photometry modes are
selected. The wide dynamic level and DC type iris lens are
adjusted.
(3)GAIN
The gain control and electronic sensitivity up modes are selected.
The electronic sensitivity multiplying factor is also selected.
(4)WHITE BALANCE The white balance mode is selected. The manual white balance
settings are made.
(5)SYNC
The sync systems (INT and LL) are selected and set up.
(6)MENU LOCK
The saved settings can be locked.
(7)SETUP
The EXIT, CANCEL or RESET action is selected and executed.
①
EXIT:
Used to save the settings and to quit the menu.
②
CANCEL: Used to return the settings to the previously saved
ones.
③
RESET:
Used to return the settings to the factory ones.
* New settings are not saved if EXIT is selected to quit the menu.
U
SET UP
D
E
L
R
Ｓ Ｅ Ｔ Ｕ Ｐ Ｍ Ｅ Ｎ Ｕ
→ＣＡＭＥＲＡ ＩＤ ＯＦＦ
ＬＩＧＨＴ ＣＯＮＴＲＯＬ
ＧＡＩＮ
ＷＨＩＴＥ ＢＡＬＡＮＣＥ ＡＴＷ
ＳＹＮＣ ＩＮＴ
ＭＥＮＵ ＬＯＣＫ ＯＦＦ
ＳＥＴＵＰ ＥＸＩＴ
