E-7
②
COLOR: The color mode can be selected.
③
B/W: The Monochrome (B/W) mode can be selected.
(4) SENS UP
Selection of electronic sensitivity increase mode. Possible to choose
electronic sensitivity increase rate.
①
OFF: Electronic sensitivity increase mode is OFF.
②
ON: Possible to set the maximum magnification during operation
of electronic sensitivity increase.
s3,/73(544%2XXXXX
The higher the factor, the higher the sensitivity, but motions at
maximum factor look unnatural.
(5) LIGHT CONTROL
The backlight compensation and sensing spot area modes can be
selected. The wide dynamic level and DC type iris lens are adjusted.
Select LIGHT CONTROL on the main
menu screen. Press the E button, and
the screen at right shows up.
①
BACKLIGHT CMP.:
The backlight compensation
modes can be selected.
s/..ORMALBACKLIGHT
compensation mode is in effect.
s30/4 3ELECT 30/4 AND PRESS
t h e E b u t t o n , a n d t h e s c r e e n
shown at right appears. Highlight
ADJUST ZONE and press the E
button, and the BLC compensation
sensing area setting screen comes
up.
Each time the E button is pressed,
the assigned area color changes in
turn Blue, Green and Red in this order.
s )NCASEOF"LUE
Using the U, D, L or R button, the field can be moved wherever
you like.
s )NCASEOF'REEN
Using the U, D, L or R button, the field can be enlarged.
s )NCASEOF2ED
Using the U, D, L or R button, the field can be reduced.
* To quit the field setting screen, hold down the E button longer
than 2 seconds.
1SPOT ZONE
→ADJUST ZONE↓
RET
LIGHT CONTROL
→BACKLIGHT COMP.
OFF
W.DYNAMIC
IRIS LEVEL
LENS IRIS
DC
RET
