E-20
12. Setup the Unit
Making the IP address and other settings
* Mode selection on the monitor screen.
“Monitor”, “Setting” or “Maintenance” are selectable.
* Camera parameter setup for Wide Light Dynamic Range, White Balance control, Back Light
compensation, Privacy Masking and so on can be made by “Camera” in setup mode. The
same control is, also possible to do those with “Camera function” in Monitor mode.
* The IP address of the unit (Initial. 192.168.1.100) can be changed in “IPv4” of the “Setting”
mode.
* For more details, the application manual in Ikegami URL on the following address is useful.
You may easily download necessary information from it.
IMPORTANT !
The Applied Instructions can be downloaded from the
following URL.
The document includes the following topics.
* Making connections
* Making basic settings
* Installation
* Monitoring
* Operation
* Using alarm function
* Recording/playback
* Other functions
* Maintenance
* Troubleshooting
* Glossary
URL http://www.ikegami.co.jp/en/products/security/network/index.html
* About the Easy Setup Tool
The Easy Setup Tool is an useful tool to change or re-set IP address, even after making setup
of the IP address.
And this is available from the above mentioned URL address by down loading to your PC. It is
recommended to read the manual, “Help for Tool Bar” in the Easy Setup Tool before you try to
use it.
