background image

Instructions for Disposal of Electrical and Electronic Equipment in Private
Households

Disposal of used Electric and Electronic Equipment
(Applicable in the European Union and other European countries with waste
recycling, disposal and collection regulations)

This symbol on the product, or in the related documents in the package, indicates that
this product shall not be treated as normal household waste. Instead, it should be taken
to a proper applicable collection point or depot for the recycling of electrical and
electronic equipment.

By ensuring this product is disposed of correctly, you will help prevent possible negative
consequences for the environment and human health which could otherwise caused by
inappropriate handling of this product. The correct recycling of materials will help to  conserve
natural resources.
For more detailed information about recycling of this product, please contact your local city authority,
your household waste disposal service or the place where you purchased the product.

The exclamation point within an equilateral triangle is intended to alert the user to 
the presence of important operating and maintenance (servicing) instructions in the 
literature accompanying the appliance.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or more of the following measures.

CAUTION;

ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PART 
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USERS AUTHORITY TO 
OPERATE THE EQUIPMENT.

Summary of Contents for IPD-DM100 Series











































Reviews: