Ikegami ICD-879, Instruction Manual

Page: 13 / 65

E-10
5-3. Entering the setup mode and its basics
5-3-1. SETUP MENU (Main menu)
Hold down the E button longer than 2
seconds, and the menu at left appears
onscreen.
A highlighted item is now selected.
(1) CAMERA ID Up to 24 alpha-numeric characters can be displayed on
screen.
(2) SENS UP The electronic sensitivity up modes are selected.
The day (color) or night (Mono) mode is selected.
On or Off Selection of Flicker Free mode.
(3) SHUTTER To select high speed shutter, the electronic sensitivity
multiplying factor is also selected.
(4) LIGHT CONTROL The backlight compensation and sensing spot area
modes can be selected. The wide dynamic level and DC
type iris lens are adjusted.
(5) GAIN The gain control mode is selected.
(6) WHITE BALANCE The white balance mode is selected.
The manual white balance settings are made.
(7) SYNC The Sync systems, AC line Lock, internal Lock or Gen-
lock mode are selected.
(8) MENU LOCK The saved settings can be locked.
(9) EXIT, CANCEL, RESET The EXIT, CANCEL or RESET action is selected and
executed.
①
EXIT: Used to save the settings and to quit the menu.
②
CANCEL: Used to return the settings to the previously saved ones.
③
RESET: Used to return the settings to the factory ones.
* New settings can be saved, if EXIT is selected to quit the menu.
ＳＥＴＵＰ ＭＥＮＵ
ＣＡＭＥＲＡ ＩＤ ＯＦＦ
ＳＥＮＳ ＵＰ ＳＴＤ
ＳＨＵＴＴＥＲ Ｘ３２ Ｘ３２
ＬＩＧＨＴ ＣＯＮＴ． ＬＥＮＳ
ＧＡＩＮ ＡＧＣ
ＷＨＩＴＥ ＢＡＬ． ＡＴＷ１
ＳＹＮＣ ＩＮＴ
ＭＥＮＵ ＬＯＣＫ ＯＦＦ
ＥＸＩＴ ＣＡＮＣＥＬ ＲＥＳＥＴ