Ikegami HLM-3250W, Operation Manual

Page: 53 / 64

- 44 -
•DVI-D(PC), Analog PC signal format
→
Refer to " Data 1 PC Input Signal
Compatible Format ".
c) Input level
Analog RGB: 700mVp-p, Positive polarity
DVI-D: TMDS
d) Input impedance
Analog RGB: 75
DVI-D: 50
(6)Embedded audio specification
(supported as standard)
a) Input signal format
•SMPTE 292M
1035i/60, 59.94 1080p/25
1080i/60, 59.94 1080p/24, 23.98
1080i/50 720p/60, 59.94
1080psF/30, 29.97 720p/50
1080psF/25 720p/30, 29.97
1080psF/24, 23.98 720p/25
1080p/30, 29.97 720p/24, 23.98
•SMPTE 272M
480i/59.94 (4:2:2) 575i/50 (4:2:2)
b) Format switching
Auto switching
c) Sampling frequency
48kHz (Synchronized with video clock)
d) Embedded audio output
The audio on each of paired channels ch1/2,
ch3/4, ch5/6 and ch7/8 is output through the
built-in stereo speaker.
(7)Embedded analog audio output
(when the optional EA-240A are mounted)
* Analog audio level 0dBs 0.775Vrms
a) Output terminal:
XLR-5-32 type (XLR type 5-pin male)
→ Refer to " Data 2 Embedded analog
audio outputs (EA-240A) ".
b) Line output
Analog audio 2-channel
Active (no-transformer) balanced output type
c) Rated output level:
+4dBs * Load impedance 10k
(At –20dBFS digital audio level)
d) Max. Output level:
+24dBs * Load impedance 10k
(At 0dBFS digital audio level)
e) Output impedance
50
f) Min. Load impedance
600
g) Quantization bit rate
24 bits/ch
b) Input signal format (Auto detection)
•HDTV
1035i/60, 59.94 SMPTE 240M
1080i/60, 59.94 SMPTE 274M
1080i/50 SMPTE 274M
1080psF/30, 29.97 SMPTE RP211
1080psF/25 SMPTE RP211
1080psF/24, 23.98 SMPTE RP211
1080p/60, 59.94 SMPTE 274M
1080p/50 SMPTE 274M
1080p/30, 29.97 SMPTE 274M
1080p/25 SMPTE 274M
1080p/24, 23.98 SMPTE 274M
720p/60, 59.94 SMPTE 296M
720p/50 SMPTE 296M
720p/30, 29.97 SMPTE 296M
720p/25 SMPTE 296M
•SDTV
480i/59.94 SMPTE 253M
575i/50 EBU N10
480p/59.94 SMPTE 293M
c) Input level
Y/GBR: 0.7Vp-p (except SYNC),
Positive polarity
Pb, Pr: ± 0.35Vp-p, Positive polarity
SYNC: ± 0.3Vp-p (SYNC on Y/G)
d) Input impedance
75 termination
(5) DVI-D and Analog PC signal
(Analog when the optional CM-240 is
mounted)
* DVI-D supported as standard
a) Input terminal
ANALOG: HD D-SUB 15-pin (female) 1 line
(when the optional CM-240 is
mounted)
DIGITAL: DVI-D single link 24-pin (female)
1 line (supported as standard)
b) Input signal format
•DVI-D (VIDEO)
1080i/60,59.94 720p/60,59.94
1080i/50 720p/50
1080psF/30,29.97 720p/30,29.97
1080psF/25 720p/25
1080psF/24,23.98 720p/24,23.98
1080p/60,59.94
1080p/50
1080p/30,29.97
1080p/25
1080p/24,23.98
480i/59.94
575i/50 480p/59.94