Ikegami HLM-3250W, Operation Manual

Page: 52 / 64

- 43 -
c) Input level
Rating: 800mVp-p ± 10%
d) Transmission speed
HD-SDI: 1.485Gb/s
SD-SDI: 270Mb/s
e) Quantization bit rate
10 bits
f) Input/output impedance
75
g) Transmission distance
Over 100m (5CFB, 1.485Gb/s)
(2)Analog composite (NTSC/PAL-B) signal
(supported as standard)
a) Input terminal
BNC 2 lines (Loop through)
b) Input signal format
NTSC composite signal SMPTE 170M
PAL composite signal
c) Input level
VS: 1.0Vp-p, Positive polarity
V: 0.714Vp-p (NTSC)/0.7Vp-p (PAL),
Positive polarity
d) Input impedance
High impedance bridge connection or 75
termination
(75 termination plug is optional.)
(3)External sync signal
(when the optional CM-240 is mounted)
Analog component input
a) Input terminal
BNC 1 line (Loop through)
b) Input level
0.3 to 4 Vp-p, three values in positive and
negative polarities, two values in negative
polarity
c) Input impedance
High impedance bridge connection or 75
termination
(75 termination plug is optional.)
(4) Analog component (RGB/YPbPr) signal
(when the optional CM-240 is mounted)
a) Input terminal
BNC 1 line (single end)
7. Specifications
7-1. General specifications
(1) Supply voltage
AC input
• 100V~120V ± 10% 50/60Hz
• 200V~240V ± 10% 50/60Hz
(2)Power consumption
Max. 145W (Standard type)
Max. 151W (with full options)
(3)Ambient operating temperature/humidity,
ambient storage temperature/humidity
Operation: 0 ° C to +40 ° C, 20% to 85%
(non condensing)
Storage: -10 ° C to +50 ° C, 5% to 85%
(non condensing)
Maximum wet-bulb temperature: 29
°
C
(4) Outside dimensions
(excluding protrusions)
776mm(W) x 498mm(H) x 110mm(D)
(5)Weight
Monitor proper: Approx. 16.3kg
(excluding the stand and option)
Stand: Approx. 3.7kg (stand)
(6)Standard accessories
Fixed stand (attached on the monitor)
Operation manual , Parallel remote connector,
AC Power cable
x1 each
7-2. Rated performance
(1)SDI signal (supported as standard)
a) Input/output terminal
Input: BNC 2 lines
Output: BNC 1 line (Active loop through for
only one line selected)
b) Input signal format (Auto detection)
•HD-SDI: SMPTE 292M
1035i/60, 59.94 1080p/25
1080i/60, 59.94 1080p/24, 23.98
1080i/50 720p/60, 59.94
1080psF/30, 29.97 720p/50
1080psF/25 720p/30,29.97
1080psF/24, 23.98 720p/25
1080p/30, 29.97 720p/24, 23.98
•SD-SDI (4:2:2): SMPTE 259M
480i/59.94 575i/50