d) Reinstall the cover and connect the power.
To Install a BNC connector on the CAT-5 cable:
1 pair from CAT-5 cable
Push and crimp
Placement in system:
The DA-43A should be placed as near the end of a system as possible.
1) Disconnect the feed from the camera at the end by the monitor, switcher or VCR. Connect the camera
feed to DA-43A
2) input. Connect one output to your Monitor, switcher or VCR. and verify that the hum is reduced or
eliminated.
3) Adjust the front panel video gain for the desired level
75 ohm Coax
100 ohm UTP CAT-5
There is one suitcase jumper located behind each input BNC
Suitcase Jumper Positioning
DA-43A
Setup options for suitcase jumper
