background image

WARNING!

 

 
 
Do not expose this product to water, rain or moisture. 

   Doing this can result in electric shock or fire.  

Never take this product apart or try to modify it.

 

   Doing so is very dangerous and could result in electric shock. 

Do not store this product near open flame.

 

   Do not use this product near open flame or place lit or flammable items, such as candles, 
   incense, ect., on it. 

Do not place any containers filled with water or other liquids near this product.

 

   Doing so could result in fire or electric shock if the liquid spills and enters the product or gets 
   it wet.  If a liquid spills near this product, unplug the product immediately. 

Do not remove or insert the power supply with wet hands.

 

   Doing so could result in electric shock. 

Do not use the power supply in any of the following ways.  Doing so could result in fire  
or electric shock.

 

   Modifying or heating the power cable 
   Damaging the power cable 
   Bending or tugging on the power cable unnecessarily 
   Knotting or kinking the power cable 
   setting heavy objects on the power cable 

When moving this product , first unplug the power supply from the outlet.  Do not tug  
the cable or move this product with the power supply plugged into the outlet.

 

   Doing so could damage the cable, possibly resulting in fire or electric shock. 

To reduce the risk of electric shock, do not remove the cover. 

   No parts inside the product can be serviced by the user.  If your product needs service contact

 

  

Ikegami Electronics (U.S.A.) Inc. 

 

at

 (

201

)

368

-

9171

 

Usage Environment 

   Avoid using or storing this product in areas such as those listed below.  Doing so could  
   damage the product or cause it to malfunction. 
       Areas exposed it heat or flames 
       Humid areas and areas where water is used 

Handling this product

 

   Do not drop or apply a strong force to this product or any included or connected parts. 
   Do not spill liquids around or inside this product or drop flammable objects around or  
   inside it. 

Power Supply

 

   Only use the supplied power supply which is designed specifically for this product. 
   Do not allow the plug to come into contact with metal or water. 

This Product is not designed for contact medical use 
   

Do not use this product for medical applications that could result in patient contact. 

37 Brook Avenue Maywood, NJ 07607     TEL: (201)368-9171     Fax: (201)569-1626     Web: www.ikegami.com 

Summary of Contents for DA-14








Reviews: