IKEA STJARNSTATUS, Manual, Page: 15 / 144

15
EN
DOOR REMOVAL
Bottom of the Doors
For
RIGHT DOOR,
turn pin 90 ˚
counter-
clockwise
For
LEFT DOOR,
turn pin 90 ˚
clockwise
To reset door pin:
If doors are removed at less than a 40°
angle, the pin returns to the home position.
It can be reset by turning the door upside
down and using a 5/32” Allen wrench to
rotate the left hand pin 90° clockwise and
the right hand pin 90° counterclockwise.
Once the door pins are reset, follow the
steps To reinstall the refrigerator doors .
3. Reinstall top hinges and screws.
4. Insert and feed water line back into the
conduit at the top left door hinge until
tube reappears at rear of unit.
Push
Push
5. Reconnect all harnesses.
6. Replace top hinge covers and screws.
7. Reconnect water line to push-lock
connection and reinstall water line
bulkhead cover at rear of unit.
8. Reconnect electrical power cord to the
wall outlet

NOTE
Upon replacement, the tube needs to be
fully inserted up to the marking line.