IKEA IBD650P Use & Care Manual Download Page 13

13

OVEN DOOR EXTERIOR

Cleaning Method:

Glass cleaner and a soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

All-Purpose Appliance Cleaner Part Number 31682 (not 
included):
See “Assistance or Service” section to order.

CONTROL PANEL

To avoid damage to the control panel, do not use abrasive 
cleaners, steel-wool pads, gritty washcloths or abrasive paper 
towels.

Cleaning Method:

Glass cleaner and soft cloth or sponge: 
Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

All-Purpose Appliance Cleaner Part Number 31682 (not 
included):
See “Assistance or Service” section to order.

OVEN CAVITY

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.

Cleaning Method:

Self-Cleaning cycle: See “Self-Cleaning Cycle” first.

OVEN RACKS

Cleaning Method:

Self-Cleaning cycle: 

See “Self-Cleaning Cycle” first. Remove racks or they will 
discolor and become harder to slide. If this happens, a light 
coating of vegetable oil applied to the rack guides will help 
them slide.

Steel-wool pad

Oven Lights

The oven lights are type A 15-watt appliance bulbs. They will 
come on when the oven is operating in any cook mode, by 
turning the Oven selector knob to Oven Light. The oven lights will 
not work during the Self-Cleaning cycle and when the Oven 
selector knob is set to OFF.

To Replace:

Before replacing, make sure the oven is off and cool.

1. Disconnect power.

2. Turn the glass bulb cover in the back of the oven 

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.

4. Replace bulb and bulb cover by turning clockwise.

5. Reconnect power.

Oven Door

For normal range use, it is not suggested to remove the oven 
door. However, if removal is necessary, make sure the oven is off 
and cool. Then, follow these instructions. The oven door is heavy.

To Remove:

1. Open oven door all the way.

2. Flip up the hinge latch on each side.

3. Close the oven door as far as it will shut.

4. Lift the oven door while holding both sides.

Continue to push the oven door closed and pull it away from 
the oven door frame.

To Replace:

1. Insert both hanger arms into the door.

2. Open the oven door.

You should hear a “click” as the door is set into place.

3. Move the hinge levers back to the locked position. Check 

that the door is free to open and close. If it is not, repeat the 
removal and installation procedures.

Oven light symbol

Summary of Contents for IBD650P

































Reviews: