IKEA GRANSLOS, Manual

Page: 18 / 64

Clock functions
Clock functions table
Clock function Application
TIME OF DAY To show or change the time of day. You can change the
time of day only when the appliance is off.
DURATION To set how long the appliance operates. Use only when
an oven function is set.
END To set when the appliance deactivates. Use only when
an oven function is set.
TIME DELAY Combination of DURATION and END function.
MINUTE MINDER Use to set a countdown time. This function has no effect
on the operation of the appliance. You can set the MI-
NUTE MINDER at any time, also if the appliance is off.
00:00 COUNT UP TIMER If you do not set any other clock function the COUNT UP
TIMER automatically monitor how long the appliance
operates.
The counting starts immediately when the oven starts to
heat.
The Count Up Timer cannot be used with the functions:
DURATION, END.
Setting and changing the time
After the first connection to the mains, wait
until the display shows
and " 12:00 ".
" 12 " flashes.
1. Turn the knob for the temperature /
microwave power right or left to set the
hours.
2. Press to confirm and switch to set the
minutes.
The display shows and the set hour.
" 00 " flashes.
3. Turn the knob for the temperature /
microwave power right or left to set the
current minutes
4. Press to confirm or the set time of
day will be saved automatically after 5
seconds.
The display shows the new time.
To change the time of day press again
and again until the indicator for the time of
day flashes in the display.
Setting the DURATION function during
cooking function
1. Press again and again until starts
to flash.
2. Turn the knob for the temperature /
microwave power right or left to set the
values and press to confirm.
ENGLISH 18