IKEA FROSTIG SC155, User Manual, Page: 7 / 48

ENGLISH 7
• In storing the food in the drawers, ensure vents
are not obstructed.
• Do not place hot food in the compartments.
• Store liquids in closed containers.
• Storing vegetables with high water content can
cause condensation to form: this does not affect
correct appliance operation.
Temperature adjustment
To change the temperatures in the compartments,
turn the thermostat setting knob:
• on the lowest numbers, 1-2 (MIN) for the LEAST
COLD temperature;
• on the highest numbers, 3-4 (MAX), for the
COLDEST temperature.
Switching the refrigerator off
Rotate the thermostat knob (1) on : the appliance
is switched off and the green LED (2) goes off. To
switch the refrigerator back on rotate the knob (1)
clockwise. The green LED (2) comes on.
“Tropical” function (removes condensation)
This function is used in case of condensation on the
drawers seals. Press the button (4) and the yellow
LED (3) will come on. To deactivate the function
press the same button (4) again.
Operation of the refrigerator
This appliance is a drawers refrigerator which
enables the storage of fresh foods and beverages.
Refrigerator compartment defrosting is completely
automatic.
Optimum performance depends on the climatic
class indicated on the rating plate. This product is
fitted with a drawers’ internal ventilation system.
For this reason, attention should be paid to the
ventilation holes. Foods and beverages should be
stored in closed containers or covered with film.
Switching the appliance on and temperature
adjustment.
Switch the power to the appliance on. The ideal
temperatures for preserving foods are already
factory set.
Notes:
• 4-5 hours are required for the refrigerator
compartment to reach a temperature suitable for
storage.
• Ambient temperature, frequency of drawer
opening and position of the appliance can affect
the temperature inside. These factors should
therefore be taken into account when setting
temperatures.
Daily use
Connect the appliance to the mains power supply.
The ideal temperatures for preserving food have
already been set at the factory (2-3/MED).
Note: After switching the appliance on, it will be necessary to wait for 2 to 3 hours before a
temperature suitable for a standard appliance load
is reached.
First use
Before carrying out any cleaning or maintenance
operations, switch the appliance off by pressing
button (1) on , then unplug or disconnect the
appliance from the power supply.
Cleaning the refrigerator
Refrigerator defrosting is completely automatic.
Droplets of water on the back wall behind the
drawer, indicate that the automatic defrost phase is
in progress.
The defrost water is automatically run into a drain
hole and collected in a container, where it
evaporates.
Clean the defrost water drain hole regularly using
the tool supplied, in order to ensure the constant
and correct flow of defrost water.
Important
• The vertical glass separators inside the drawers
are part of the structure and should not be
removed.
• The drawers sliding guides are coated with a
food compatible lubricant which helps opening
and closing.
Never remove the lubricant and ensure that no
foreign objects fall on the sliding guides,
preventing them from operating correctly.
Cleaning and maintenance