IKEA FOLJANDE 10392192, Manual

Page: 9 / 48

ENGLISH 9
To clean the grease filter
The metal grease filter has an unlimited life
and must be washed once a month by hand
or dishwasher at low temperature and with
a short cycle. With cleaning in a dishwasher
the grease filter may become dull; this does
not effect its filtering capacity.
Grease filter maintenance:
1. Unplug the appliance or disconnect the
power supply.
2. Remove the grease filters: pull the spring
release handle, then remove the filter
downwards.
3. After cleaning the grease filter, remount
in reverse order ensuring the entire
extraction surface is covered .
Charcoal filter maintenance (if the hood is
installed in recirculation mode)
1. Pull out the plug or disconnect the power
supply.
2. Remove the grease filter
3. If the carbon filters are already fitted
(two filters that cover the protective
grilles for the motor impeller) and have
to be replaced, turn the central handle
anti-clockwise to unlock them.
4. Open the two filter shells
5. Pull out the two circular mats
6. Proceed in reverse order to fit the new
filters.
7. Refit the grease filters.
Unlike traditional charcoal filters, this
charcoal filter can be washed and
reactivated.
With normal hood use, the filter should
be cleaned once a month. The best way
to clean the filter is in a dishwasher at
the highest temperature possible, using
a normal dishwasher detergent. To avoid
particles of food or dirt settling on the
filter during washing and giving rise to
unpleasant smells, it is advisable to wash
the fi lter on its own. After washing, dry the
filter in the oven at 100°C for 10 minutes to
reactivate it.The filter will retain its odour-
absorbing capacity for three years, after
which it will have to be replaced.
2x
Lamp maintenance
The hood is equipped with a lighting system
based on LED technology.
The LEDs guarantee an optimum lighting,
a duration up to 10 times as long as the
traditional lamps and allow to save 90%
electrical energy.
For replacement, contact the Authorized
Service Centre.