IKEA FOLJANDE 10392192, Manual

Page: 10 / 48

ENGLISH 10
What to do if ...
Before contacting the Authorized Service
Centre:
Switch the appliance on again to see if the
problem has disappeared. If not, switch it
off again and repeat the operation after an
hour.
If your appliance still does not work properly
after carrying out the checks listed in the
troubleshooting guide and switching the
appliance on again, contact the Authorized
Service Centre, clearly explaining the
problem and specifying:
• the type of fault;
• the model;
• the type and serial number of the
appliance (given on the rating plate);
• the Service number (the number after
the word SERVICE on the rating plate
inside the appliance).
Problem Possible cause Solution
The appliance does not
work
There is no mains
electrical power
Check for the presence of mains
electrical power.
Turn off the appliance and restart it to
see if the faults persists.
The appliance is not
connected to the
electrical supply
Check if the appliance is connected to
the electrical supply.
Turn off the appliance and restart it to
see if the faults persists.
The hood’s suction level
is not enough
The suction speed is
too low
Check the suction speed and adjust as
necessary.
The metal filters are
dirty
Check that the filters are clean
If not, clean the filters in the
dishwasher.
The air vents are
obstructed
Check the air vents for any
obstructions and remove as necessary.
The light does not work The LED is broken For replacement, contact the
Authorized Service Centre.
The BULB is broken Check the light bulb and replace it if
necessary.
The light bulb is not
correctly fitted
Check that the light bulb has been
correctly fitted. If not, fit the light bulb
in right way.