9
appropriate plug fitted in its place by
an authorised customer service agent.
The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of
to avoid a possible shock hazard and
should never be inserted into a mains
socket elsewhere.
Products sold in
AUS only:
Use a
residual current device (RCD) with a
rated residual current of 30 mA or less.
VIBRATION INFORMATION
Vibration level
The vibration emission level stated
in this instruction manual has been
measured in accordance with a
standardised test given in UL 62841 /
CSA C22.2 No. 62841. It may be used to
compare one tool with another and as
a preliminary assessment of exposure
to vibration when using the tool for
the applications mentioned in this
manual. However, using the tool for
different applications, or with different
or poorly maintained accessories, may
significantly increase the exposure
level.
An estimation of the level of exposure
to vibration should also take into
account the times when the tool is
switched off or when it is running but
not actually doing the job, as this may
significantly reduce the exposure level
over the total working period.
Protect yourself against the effects of
vibration by maintaining the tool and
its accessories, keeping your hands
warm, and organising your work
patterns.
ASSEMBLY
Before any work on the machine
(e.g. maintenance, tool change,
etc) as well as during transport and
storage, set rotational direction
switch to the centre position.
Unintentional actuation of the trigger
can lead to injuries.
Charging your screwdriver
When the charger is connected to the
electricity supply, the red diode on the
screwdriver (Pic.2) (2.2) lights up. The
diode lights up while the battery is
being charged.
Under normal conditions of use the
screwdriver can be recharged several
hundred times.
ATTENTION!
The recharging process generates
heat in the battery.
Note:
The battery that is supplied with
the screwdriver has been charged for
test purposes only and must be fully
recharged before first time use.
First read the safety instructions then
follow the loading instructions. Insert
