IKEA BEJUBLAD, Manual

Page: 12 / 48

5. Press to confirm.
6. When the set time ends, the symbol
or and the set time flash. The acous-
tic signal sounds for two minutes. The
appliance deactivates. Press a button
or open the appliance door to stop the
signal.
If you press while setting the time
for Duration , the appliance
switches to setting the End function.
Setting the Minute Minder
Used to set a countdown time. The maxi-
mum time you can set is 23 hours 59 mi-
nutes. This function has no effect on the op-
eration of the oven. You can set the Minute
Minder at any time, also if the appliance is
off.
1. Press again and again until and
00 flash in the display.
2. Press + or - to set the Minute Minder. At
first the time is calculated in minutes
and seconds. When the time you set is
longer than 60 minutes, the symbol
comes on in the display. The appliance
then calculates the time in hours and
minutes.
3. The Minute Minder starts automatically
after five seconds.
4. When the set time ends, the acoustic
signal sounds for two minutes. 00:00
and flash in the display. Press a but-
ton to stop the signal.
If you set the Minute Minder when the
Duration or End function oper-
ates, the symbol comes on in the display.
Count Up Timer
Use the Count Up Timer to monitor how
long the oven operates.
Press again and again until the display
shows time without clock symbols.
You cannot use the Count Up Timer
when the Duration or End func-
tion operates.
Using the accessories
Warning! Refer to the Safety chapters.
Core temperature sensor
The core temperature sensor measures the
core temperature of the meat. When the
meat is at the set temperature, the appli-
ance deactivates.
There are two temperatures to be set:
• The oven temperature.
• The core temperature. Refer to the values
in the table.
Recommended core temperatures
50 °C Rare
60 °C Medium
70 °C Well done
Important! Only use the core temperature
sensor supplied with the appliance, or
genuine replacement parts.
1. Set the oven function and the oven tem-
perature.
2. Put the tip of the core temperature sen-
sor into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket on the side wall
of the oven.
The display shows the symbol of the
core temperature sensor and the
default core temperature. When you
use the core temperature sensor for the
first time, the default core temperature
is 60 °C.
ENGLISH 12