IKEA 404.756.14, Manual

Page: 60 / 72

1
The ceiling spray
arm is placed on the
ceiling of the
appliance.
2
1
2
Release the stoppers
on the sides of the
sliding rails of the
cutlery drawer and
pull the drawer out.
3
1
2
Move the upper
basket to the lowest
level to reach the
spray arm more
easily.
4
C
B
A
The spray arm (C) is
installed in the
delivery tube (A)
with the mounting
element (B).
5
Turn the mounting
element
counterclockwise
and pull the spray
arm downwards.
6
Wash the spray arm
under running
water. Use a thin
pointed tool, e.g. a
toothpick, to remove
particles of soil from
the holes. Run the
water through the
holes to wash soil
particles away from
the inside.
7
Insert the mounting
element in the spray
arm and fix it in the
delivery tube by
turning it clockwise.
Make sure the
mounting element
locks into place.
8
1
2
Install the cutlery
drawer on the
sliding rails and
block the stoppers.
Troubleshooting
Warning! Improper repair of the
appliance may pose a danger to
the safety of the user. Any repairs
must be performed by qualified
personnel.
The majority of problems that may occur
can be solved without the need to contact
an Authorised Service Centre.
Refer to the below table for information on
possible problems.
ENGLISH 60