IKEA 204.620.52, Manual

Page: 34 / 80

34
EN
CARE AND CLEANING
Replacing the Oven Light
figure 19: Oven light protected by glass shield
Replacing the oven interior light bulb:
The interior oven light is located at the rear of the
oven cavity and covered with a glass shield. The
glass shield must be in place whenever the oven is
in use (Figure 19).
1. Turn electrical power off at the main source or
unplug the appliance.
2. Remove the interior oven light shield after re-
moving the wire holder by carefully moving the
wire to the side of the glass shield. The tension
from the wire holds the glass shield in place.
3. Pull the shield straight out. Do not twist or turn.
4. Replace the bulb with a new appliance bulb.
5. Replace the glass oven light shield. Replace wire
holder.
6. Turn the power back on again at the main
source (or plug the appliance back in).
7. Be sure to reset the time of day on the clock.
wire
holder
glass
shield
Removing the Storage Drawer
Use the storage drawer for storing cooking utensils.
The drawer can be removed to facilitate cleaning
under the range. Use care when handling the
drawer.
CAUTION
Be sure the oven is unplugged and all parts are
cool before replacing the oven light.
figure 20: Open storage drawer
figure 21: Closed storage drawer
Cleaning under bake element
The bake element is located in the lower oven cavity.
For some models, if the lower bake element is visible it
may be tilted up for easier access to the oven bottom
for cleaning. Remove the oven racks before raising the
element. Be careful not to raise the element more than
4 or 5 inches from the resting position.