Password Protection Function:
Password Setup:
Keyboard locking feature will be activated when the switch is turned to the
left, when keyboard is locked, the keyboard will not be able to provide any service.
When is switched to the right, the keyboard is activated and ready to use.
A passcode can be set up to activate and deactivate the keyboard as well.
1. Make sure the keyboard is turned on.
2. Press button.
3. Create a passcode between 1-6 digit when the number key caps are lit up, then
press enter to confirm the passcode.
4. Password is set up completely after all the steps above have been completed.
**Please Note:
1. When the password is entered incorrectly, you may re-enter the correct password
again after keypads have done flashing.
2. If the password is entered incorrectly 3 times, it will go back to the first step of
initial password setup.
3. Password setup will end if is pressed during the setup.
4. To cancel entering the password login, just simply press the “enter” key on the
keyboard.
5. The password will not be wiped out even when the keyboard is disconnected
from the power.
Please enter the correct password when the keyboard is first turned on from the
off mode (number keypad will be flashing to remind you) to unlock the keyboard.
If the password is entered incorrectly for 7 times, the keyboard will lock itself up.
