background image

Keyboard Specification:

Function Description:

Key Feature:

Key number: US ASCII (87 keys) = US Layout
Key switch lifetime: 50KK Times
Dimensions: L 347.5mm

W 146mm

H 28.62mm

Interface: USB

DC5V ---- 500mA

Cable length: 1.8 m

Switch the main switch to the left (red) to lock the keyboard, and turn to the 

right (green) in order to unlock the keyboard.

The shortcut functions can be accessed through pressing Fn+(F1-F12).

When is            pressed, F1-F12 will automatically activates below function.

Rotate counter-clockwise to decrease the volume, and rotate the button 

clockwise to increase the volume. Press down the button to switch to silent 

and non-silent mode.

Button

Function

Key

Shortcut Function
Turn on/off Backlit
Change Backlit Mode
Decrease Backlit Brightness
Increase Backlit Brightness
Change direction of Backlit
Change back direction of Backlit
Decrease the backlit flashing rate
Increase the backlit flashing rate
Play/pause playlist
Previous Song on playlist
Next Song on playlist
Calculator Application

F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12

Password

Setup

Password

Reset/update

F-Section Short

Cut Key Lock

Win Key Lock

Reset all

Settings

Summary of Contents for typemaster X400






Reviews: