11
Label on Safety Harness, which must be in place, intact and legible
while the Safety Harness is in use.
1. Controlling Notifi ed Body
2. Serial Number
3. Product Type
4. IKAR GmbH Product References /Type / Variant
5. Standard /Year
6. Considerations for Use
7. Date of Manufacture
8. Manufacturer
9. Next revision
Key to Safety Harness codes:
IK = IKAR GmbH
G = Safety Harness
1 = Single point harness
2 = Two point harness
20 = Two point harness
3 = Two point harness
A = Carbon steel “D” rings front and back, three bar quick connect buckles
B = Carbon steel “D” rings front and back, sprung loaded aluminium quick release buckles
C = Carbon steel rear “D” (NO s) rings, webbing front attachment loops
R = Overhead rescue attachment
W = Integral work positioning belt
This instruction for use booklet covers the following IKAR GmbH products:
IK G 1 Single Point (rear “D” ring) Fall Arrest Safety Harness
IK G 2 Two Point (rear “D” ring and front chest “D” ring) Fall Arrest Safety Harness
Fall Arrest Attachment Point
Back “D”-Ring marked “A”
Work Positioning Points
Rescue Attachment
marked “A”
Fall Arrest Attachment Point
Front Loops marked with
½ “A”
Fall Arrest Attachment Point
Front “D”-Ring marked “A”
These Safety Harness are classed as Personal Protective Equipment (PPE), by the Regulation (EU) 2016/425 and have been shown to
comply with this directive through the harmonized European standards
1
2
9
8
5
4
3
7
6
ENGLISH