Specifications
Optional Accessories
Some other products that work well with the Stryder Light available from Ikan include:
HD-STND-V2
KCP-703
ROLLR-STND10
SW-04
IDX-096
Heavy Duty Light Stand
Stage Clamp with 16mm Stud
2-Stage Roller Stand 10 ft 6 in.
Safety Wire
96 Channel DMX Console
Installation & Power Supply
1. Ensure power is OFF before installation.
2. Place the light on the Ikan stands, release the tension knob on the 5/8” receiver, adjust the light in the desired direction, and
tighten the tension knob on the 5/8” receiver.
3. When connecting the power cords, plug the DC power cords into the socket on the rear panel (as shown on the drawing).
If batteries are used: Illuminate light by pressing power switch. On the default screen the number 13.8V at the upper right corner
indicated the current internal DC voltage. When powered by the battery it means the current battery voltage; however, this
number will display in flashing status if the voltage is lower than 11V which indicates low battery voltage.
Power the LEDs
The SB200 light comes with an included AC power supply and 4 ft cable. This allows the user to plug into any standard 120-240
VAC electrical outlet. The SB200 light can be powered from either an AB Mount Pro Battery, or a V-Mount Battery. The fixture comes
standard with either AB-Mount or V-Mount plates.
SB200 Specifications
Beam Angle
60° - with adapter 30°
Build Material
Fiber Reinforced Plastic
Control
Toggle Button with Knob Control
Cooling System
Active Cooling Fan
Dimming
Flicker Free Dimming
Onboard Dimming Knob: 100-0%
Fixture Size
16 x 11 x 9 in.
Fixture Weight
11 lbs
Head Type
3200K-5600K (Adjustable 2700K-6500K)
Lens
6 Inch Fresnel
Light Source
200 Watt Bi-Color LED
Power Supply
Input: 100-240VAC
Output: 15VDC
Yoke
Cast Aluminum with 1 1/8” Pin Receiver
DMX 512 Controls
The DMX IN/OUT on the SB-200 allows for remote fixture control over the
color and brightness.
The 8Bit DMX allows for use with controllers that use just dimmer controls.
Depending on channel assigned the brightness is controlled on the first
fader. The next fader controls the color temperature from 2700K at 0% to
6500K at 100%.
