Ikan OTTICA, Manual

Page: 32 / 45

- 32 -
5.1.1 Camera Return Command
Under common working condition, the camera could be controlled through RS232/RS485
interface (VISCA), RS232C serial parameter are as follows:
Baud rate: 2400/4800/9600/115200 bits / sec;
Start bit: 1; data bits: 8; Stop bit: 1; Parity: None.
5.1 VISCA Protocol List
5. Serial Communication Control
ACK/Completion Message
Command Packet Note
ACK z0 41 FF Returned when the command is accepted.
Completion z0 51 FF Returned when the command has been executed.
Error Messages
Command Packet Note
Syntax Error z0 60 02 FF Returned when the command format is different or
when a command with illegal command parameters
is accepted
Command Not
Executable z0 61 41 FF Returned when a command cannot be executed due
to current conditions. For example,when commands
controlling the focus manually are received during
auto focus.
3. Wireless Wi-Fi Login Page
- If you do not check the above DHCP configuration (automatically obtain IP), then
open the browser, enter the wireless network IP address in the address bar (Default:
192.168.1.250), press Enter to log construction.
- If you checked DHCP, then you will obtain IP automatically, just login specific router or
switch user interface settings to view the allocation of IP address.