17
Display
1. Press the "Menu" key (N).
2. Select the menu "Display" and confirm the input.
3. Select the following settings:
- Timer
In the “Display“ menu you can specify what information will be
displayed on the main screen.
Programs
1. Press the "Menu" key (N).
2. Select the menu "Programs" and confirm the input.
Select
To select a program, use the rotary/push knob and press “Select”.
Only a program which has the right parameters can be selected.
When a program has been successfully selected, this is indica-
ted by a tick mark (
). The vacuum controller is then in program
mode. In the main screen, the program view can then be selected
by turning the knob to the right. Turning the knob to the left re-
turns to the main screen.
Start
To start a selected program, the push knob must be pressed in the
main screen.
Edit
Edit the selected program parameters. Start to edit the selected
program parameters by pressing on menu option "Edit" with rota-
ry/push knob. You can edit, delete or insert one selected program
segment in the program.
Delete
Deletes the selected program. If a selected program is deleted by
pressing on menu option "Delete" with rotary/push knob, all the
program parameters will be emptied. The tick (
) disappears.
Details for editing the program
In this program, you can define up to 10 segments. The selected
segment is highlighted. Then, you can edit, delete or insert a seg-
ment in this program. The program is save automatically.
Edit
If the background of a selected value is yellow, you can change the
setting of the pressure value or the time value.
Delete
When a highlighted segment is deleted, the subsequent segments
move upward, closing the gap created by the deleted segment.
Operating mode B
In this operating mode, the set target value is saved when the
current run comes to an end or the device is switched off, and the
value can be changed.
Operating mode C
In this operating mode, the set target value is saved when the
current run comes to an end or the device is switched off and the
value cannot be changed.
Operating mode D
In this operating mode, the set pressure value will be set with a
short display and is saved when the current run ends or the device
is switched off.