21
Then, the system check screen will be displayed for several seconds.
Symbols are shown on the screen, including the working mode set-
ting, the target speed, the maximum rotation speed (rpm) and timer
maximum value etc. of the device.
Factory setting
The device is supplied with following factory setting:
Menu Settings:
mode
A
max rpm
6000
rpm
timer max
30
minute
language
English
Working Setting:
target rpm
400
rpm
timer sec
off
rev sec
off
10
Resetting parameters to factory setting
10.1
To reset the parameters to the factory settings, proceed as following:
• Pull out main plug from the device.
• Hold the controller buttons “Menu/Back” and “Timer” simultane-
ously and re-insert main plug in power outlet.
• The unit is now reset to the factory settings.
Symbols Explanation
Maximum rotation speed of the device (If “Turbo” function is
activated, the maximum rotation speed could reach 8000 rpm).
Rotation symbol (The symbol will change into
or
if “Rev”
function is activated).
Rotation speed setting.
Operation mode.
“Timer” maximum value of the device.
“Timer” symbol.
After the system check screen, the working screen will appear
and the device is ready for operation.
Note:
Figure above shows specified values corresponding to the
default settings at delivery.
Summary of Contents for ULTRA -TURRAX Tube Drive P control
