IKA T 65 D, Operating Instructions Manual

Page: 24 / 72

24
Technical data
S 65 KG-HH- G 65 G G 65 M G 65 F
Working range 2 l - 50 l 2 l - 40 l 2 l - 30 l
Stator diameter 65 mm 65 mm 65 mm
Rotor diameter 58 mm 58 mm 58 mm
Circumferential speed 21,9 m/s 21,9 m/s 21,9 m/s
Min./ Max. immersion depth 90 mm / 450 mm 80 mm / 450 mm 80 mm / 450 mm
Shaft length 520 mm 510 mm 500 mm
Materials in contact FFPM / SIC, 1.4571 FFPM / SIC, 1.4571 FFPM / SIC, 1.4571
with medium
pH range
2 - 13 2 - 13 2 - 13
Suitable for solvents yes yes yes
Suitable for abrasive substances no no no
Max. temperature 180 °C 180 °C 180 °C
Sterilization methods wet chemical wet chemical wet chemical
Working range vacuum 1 mbar 1 mbar 1 mbar
Working range pressure 6 bar 6 bar 6 bar
Ultimate fi neness, suspensions 25 µm - 75 µm 20 µm - 50 µm 5 µm - 20 µm
Ultimate fi neness, emulsions 5 µm - 25 µm 5 µm - 15 µm 1 µm - 10 µm
Slide ring seal Tungsten carbide Tungsten carbide Tungsten carbide
+ 6 % cobalt + 6 % cobalt + 6 % cobalt
O-rings FKM FKM FKM
Other parts Stainless steel 1.4571 Stainless steel 1.4571 Stainless steel 1.4571
Subject to technical changes!
Quantity details
The quantities processed are limited, in particular,
by the viscosity of the medium:
Viscosity Volume
0,001 Pas max. 30 l
0,1 Pas max.10 l
1,0 Pas max. 5 l
5,0 Pas max. 3 l
At higher viscosities, a breakdown of the fl ow
and dry-running conditions for the seal must be
expected.
Consideration of fl ow anomalies
The quantity details given above apply for New-
tonian fl uids. Processing of substances with thi-
xotropic or dilatant (shear thickening) behaviour
is possible, but the particular volumes must al-
ways be determined by trials.