8
Moving the device
NOTICE
When transporting the device do
not use the door handle. This may
damage the device.
The device can be moved:
•
with optional accessory (roller stand).
•
on a pallet (transport straps).
•
by hand (4 persons at least).
Installation
Unpacking
Unpacking
•
Please unpack the device carefully.
•
In case of any damage a detailed report must be sent imme-
diately (post, rail or forwarder).
Scope of delivery
• IKA
Oven 125 control - dry or IKA Oven 125 control - dry glass
•
2 shelves
•
Screwdriver (for safety temperature limiter)
•
Tilt protection
•
Mains cable
Setting up
Fixing against the wall is compul-
sory!
•
Place the device on and even, clean, dry and fireproof surface
in well-ventilated environment.
Fixing the device to the wall
NOTICE
The screws used for fixing are se-
lected according to the wall con-
ditions and they are not included.
WARNING
•
USB cable
•
User guide
•
Calibrating certification
•
Warranty card
NOTICE
Transport and assembly is the
same for the drying cabinet with
glass door!
•
Keep sufficient distance from radiators and other heat sources.
•
Keep at least 150 mm between walls and the device.
As indicated in the following figures, you should attach the device
to a wall with the tilt protectors included with the device.
Fasten the tilt protectors to the rear side of the device.
150 mm