4
Indicates an (extremely) hazardous situation, which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation, which, if not avoided, can result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, can result in injury.
Indicates practices which, if not avoided, can result in equipment damage.
Indicates a hazardous situation that result from a hot surface!
Indicates crushing risk to fingers/hands.
Explanation of warning symbols
Safety instructions
CAUTION
CAUTION
We declare under our sole responsibility that this product corresponds to the directives 2006/42/EG, 2014/35/EU, 2014/30/EU and
2011/65/EU and conforms with the following standards or normative documents: EN 61010-1, EN 61010-2-010, EN 61326-1,
EN 60529, EN ISO 12100 and DIN 12880.
A copy of the complete EU Declaration of Conformity can be requested at [email protected].
Declaration of conformity
General information:
• Read the operating instructions completely before
starting up and follow the safety instructions.
•
Keep the operating instructions in a place where they can be
accessed by everyone.
DANGER
WARNING
CAUTION
NOTICE
Device setup
DANGER
Do not use the device in explosive
atmospheres, it is not EX-protected.
With substances capable of forming
an explosive mixture, appropriate
safety measures must be applied,
e.g. working under a fume hood.
To avoid bodily injury and property
damage, observe the relevant safe-
ty and accident prevention mea-
sures when processing hazardous
materials.
WARNING
Please pay attention to the danger-
ous spots of the device in Fig. 2.
CAUTION
Media may only be processed or
heated with this device in safe op-
eration without monitoring if their
flashpoint lies above the set safety
temperature limit. The set safety
temperature limit must be at least
25°C below the flashpoint of the
medium in use. (EN 61010-2-01)
CAUTION
There is a crushing risk when open-
ing or closing the door. Keep your
hands away from squeezing edges.
•
Set up the device in a spacious area on an even, stable, clean,
non-slip, dry and fireproof surface.
•
Ensure that only trained staff work with the device.
•
Follow the safety instructions, guidelines, occupational health
and safety and accident prevention regulations.
Transport and installation
CAUTION
Ensure that your fingers do not get
crushed when setting down the
device.
•
Beware of the high dead weight of the device when trans-
porting.
•
Insufficient ventilation may result in the formation of explo-
sive mixtures. Only use the device in well ventilated areas.
•
Disconnect the mains plug before cleaning, maintenance and
transportation of the unit