IKA MultiDrive BL 2000, Manual

Page: 5 / 13

8 9
Useful information
The blending vessel is designed for use in combination with MultiDrive basic / control �
It can be used for mixing and wet crushing of free-flowing and liquid media in batches� It can
be widely used for many applications� The following list is not complete and can be extended
by experiments�
List of substance to be blended:
Ice cream, milk, sauces, vegetables, meat,nut butter, spices�
Note: MultiDrive BL 2000 T has integrated temperature / RFID sensor� When used in
combination with the MultiDrive control , it can be used to measure and limit the sample
temperature as well as to record the operating time and set the maintenance time�
Caution!
› Please pay attention to avoiding hand injury when operate and clean the vessel�
› The vessel and inside medium may be very hot after operation� Allow it to cool down before
opening the lid� Use your personal protective equipment�
!
Notice!
› The vessel must always be closed during operation� Switch off the drive unit immediately if
any material leaks from the vessel� Clean the device after disconnected power plug�
› The temperature of the medium must not exceed 80 °C�
› Observe the prescribed filling quantity (min� / max)�
› The processing time is limited (depending on the vessel / drive unit, see “Technical data”)�
The vessel must be allowed to cool down for a few minutes before processing the sample
further in the vessel�
Unpacking
› Please unpack the vessel carefully�
› Any damage should be notified immediately to the shipping agent (post office, railway net-
work or logistics company)�
1 IKA MultiDrive BL 2000 or
IKA MultiDrive BL 2000 T
2 User guide
3 Warranty card
IKA
Mu
ltiD
rive
BL
20
00
IKA
Mu
ltiD
rive
BL
20
00
T
Gar
ant
y
1+2+3
1
2
3
Vessel Name: IKA MultiDrive BL 2000 T
Maintenance Time:
20:00
hh:mm
Reset Maintenance Time:
No
Temperature Limit:
80
˚C
OK
Vessel
i
Temperature /
RFID reader
Temperature /
RFID sensor