6
7
Safety instructions
/// General information
›
Read the operating instructions completely before starting up and follow the safety
instructions.
› Keep the operating instructions in a place where it can be accessed by everyone�
› Ensure that only trained staff work with the device�
› Follow the safety instructions, guidelines, occupational health and safety and accident
prevention regulations�
› The vessel must only be used in a technically perfect condition�
› Refer to the operating instructions for the drive unit�
Caution!
› Wear your personal protective equipment in accordance with the hazard category of the
medium to be processed, there is a risk of:
- splashing of liquids
- body parts, hair, clothing and jewellery getting caught�
- sharp blade edges�
!
Notice!
› Pay attention to the marked sites in Fig� 1�
› Protect the vessel from bumping and impacting�
› Do not use any damaged vessel e�g� with hairline cracks or splits�
› Check the vessel beforehand for damage each time when you use them� Do not use dam-
aged components�
/// Device setup
!
Notice!
› Ensure that the vessel and the cover is firmly attached to the drive unit prior to operating the
device�
› The drive unit cannot be operated without a closed vessel�
Source language: German
Explication of warning symbols
/// Warning symbols
Indicates an (extremely) hazardous situation, which, if not avoided, will
result in death, serious injury�
Danger!
Indicates a hazardous situation, which, if not avoided, can result in
death, serious injury�
Warning!
Indicates a potentially hazardous situation, which, if not avoided, can
result in injury�
Caution!
!
Indicates practices which, if not avoided, can result in equipment damage�
Notice!
/// General Symbols
Position number
A–––
Correct / Result
Shows the correct execution or the result of an action step�
Wrong
Shows the incorrect execution of an action step�
Note
Displays action steps that require particular attention to detail�
/// Working with the vessel
Danger!
› With substances capable of forming an explosive mixture, appropriate safety measures must
be applied, e�g� working under a fume hood�
› To avoid body injury and property damage, observe the relevant safety and accident preven-
tion measures when processing hazardous materials�
Warning!
› Only process samples that will not react dangerously to the extra energy produced through
processing� This also applies to any extra energy produced in other ways, e�g� through light
irradiation�
!
Summary of Contents for MultiDrive BL 2000
Page 1: ...IKA MultiDrive BL 2000 IKA MultiDrive BL 2000 T...
Page 2: ...3 ENGLISH...
