IKA MICROSTAR digital, Manual

Page: 12 / 14

29 28
E 2
Cause › hardware driving error
Effect › motor off
Solution › contact the service department
E 3
Cause › temperature inside of the device is too high
Effect › motor off
Solution › switch off the device and allow it cool down
Error code | Cause | Effect | Solution
E 4
Cause › motor blockage or overload
Effect › motor off
Solutions
› disconnect the device from the power supply
› decrease the load on the motor and restart device again
E 8
Cause › speed sensor fault or overload
Effect › motor off
Solution › disconnect the device from the power supply
If the actions described fails to resolve the fault or another error code
is displayed then take one of the following steps:
› Contact the service department.
› Send the device for repair, including a short description of the fault.
Error codes
/// Troubleshooting correctly
If an error occurs, the fault is shown by an error code on the screen.
Proceed as follows in such cases:
› Disconnect the device from the power supply.
› Carry out corrective measures.
› Restart device.
Warranty
/// Regulations
In accordance with IKA warranty conditions, the warranty period is 24 months.
For claims under the warranty please contact your local dealer. You may also
send the machine direct to our factory, enclosing the delivery invoice and giving
reasons for the claim. You will be liable for freight costs.
The warranty does not cover worn out parts, nor does it apply to faults resulting
from improper use, insufficient care or maintenance not carried out in accor-
dance with the instructions in this operating manual.
Accessories
/// An overview
General accessories
›
R 1825
Plate stand
› R 1826 Plate stand
› R 1827 Plate stand
› R 182 Cross sleeve
› RH 3 Strap clamp
›
R 300
Stirring shaft protection (with 2 screws)
› FK 1 Flexible coupling
› USB 2.0 cable A – micro B
See more accessories on www.ika.com.