17
Bluetooth
®
:
This symbol appears in the status bar when the Algae-
master 10 is connected via Bluetooth to another Blue-
tooth device (see chapter “15 Interfaces and outputs”).
USB interface data export:
This symbol means the device is communicating via a
USB cable.
PC control:
This symbol means that the device is connected to a
computer and is being controlled from the computer.
Manual entry is no longer possible.
USB memory stick:
This symbol is displayed when a USB memory stick is
connected to the Algaemaster 10 and is recognised by
the device.
Measurement recording:
This symbol is displayed during measurement recording.
Motor activated:
This symbol indicates the rotation status of the stirrer.
13.4 Menu navigation
WARNING
In an emergency the stirrer (sta-
tion) can be switched off by pres-
sing the “safe/STOP” button (Fig.
8, (F)).
NOTICE
On the display, the active menu op-
tion is highlighted in blue.
In an emergency the stirrer (station)
can be switched off by pressing the
“safe/STOP” button (Fig. 8, (F)).
• Press the “Menu“ key (I).
• Select the menu by turning the rotating/pressing knob (K) to
the right or left to select the desired menu or sub-menu, which
can then be selected by pressing the rotating/pressing knob (K).
• Push or turn the rotating/pressing knob (K) again to select the
desired menu option and edit the values or settings, or activate/
deactivate a function.
• Turn the rotating/pressing knob (K) on “OK“ or press the “Back“
key (H) to end the procedure and return to previous menu or
working screen.
Navigation controlsin the menu
K
H I
Picture section Fig. 8.
F
Light status:
This symbols displays whether the LED panels are swit-
ched off.
This symbol displays whether the LED panels are swit-
ched on.
Thermostat
:
This symbol displays whether the LED panels are swit-
ched on.
Thermostat filling level:
This symbol indicates the current filling level of the con-
nected thermostat.
Sensor
:
This symbol appears when the external sensor (temoera-
tur sensor, pH sensor) is connected.
This symbol indicates that the corresponding function for
pH control is being used (pH limit value and hysteresis).
Pumps and valve status:
This symbol displays whether a pump or gas valve has
started or is open.
This symbol displays whether a pump or gas valve has
stopped or is closed.
