UNO Synth
Pro Editor
3 - The Synth Panel: ENGINE
13
Chapter 3 – The Synth Panel: ENGINE
The Synth panel shows you all the synthesis parameters of the UNO Synth PRO along with the effects
parameters. The hardware synthesizer responds to parameters changes from the Editor in real-time, and
similarly, the Editor tracks changes made on the UNO Synth PRO hardware itself as well. You can put one hand
on the UNO Synth and the other hand on the Editor to work with them simultaneously if you prefer. Click the
Engine tab at the lower left to access the traditional synthesizer parameters of the UNO Synth PRO including the
oscillators, mixer, filters, LFO and envelopes.
3.1 – The Oscillator Section
Here you control the shape, tuning and intermodulation of the 3 analog oscilaltors.
Controls:
• Shape: The shape knobs change the waveform of each oscillator continuously from Triangle to Saw to
Pulse and then change the duty cycle of the pulse width from 50 to 98 percent. There is a waveform
display next to each oscillator’s shape control for visual feedback.
• Tune: The tune knobs change the tuning of each oscillator. The tuning range goes from 0-99 cents, then to
1-12 semitones in each direction.
• Ring 2: The Ring 2 button applies a ring modulation effect to Oscillator 2.
