IK Multimedia iRig Acoustic Stage, User Manual

Page: 8 / 30

English
8
8. When mixing the guitar’s on-board pickup system with iRig Acoustic using the MIX control, always start
by setting this switch to the 0° position. On certain guitars you might get a fuller and more natural sound
by flipping the phase of the AUX input by setting this switch to the 180° position. When no AUX input is
connected this switch reverses the phase of the iRig Acoustic Stage output, and it can be useful when
playing in front of loud stage monitors to experiment with both positions to find the one that gives less
feedback and a more solid tone.
9. Use the volume knob to adjust the overall output signal. This control can also be used to turn the guitar
down between songs as it is easy to operate even if you can’t see the unit. Tip: Always keep a bit of margin
when playing so that you can always quickly turn it up if you would need to. Also remember to push the
control in, once you set the volume as preferred, to avoid accidental movements of the volume control.