Quick programming using Avelour
Manuel d’utilisation
K0J00010
IJINUS NA
-
c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States -
7
c.
Second step : Selection of the sensor to configure, eventually a firmware update would
be suggested
During its connection with the sensor, the following pop up appears :
When connected, and only if the sensor already has measures in memory, the following options will suggest you
to retrieve the measures:
After your choice of these options, if the sensor is not up to date (case of new firmware developed since your
last connection or you are now connected with a new version of the software Avelour). It is strongly
recommended to read carefully the different messages in the options windows.
The firmware update can last a moment so it is advised to do it while in your office. On-site prefer the best radio
connection (so not if the metal plate of a man hole is closed).
When the sensors is ready, Avelour will look like bellow :
