Quick programming using Avelour
Manuel d’utilisation
K0J00010
IJINUS NA
-
c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States -
6
Example of a level sensor with Sigfox communication
4.
Quick configuration with the software Avelour
We will show here the classical version of the system programing, level measurement and data sending by
Gsm/Gprs/3G.
a.
Necessary equipment
-
The software Avelour in 6.04 version minimum
-
Programing Wiji kit or Wiji key
Avelour
Wiji kit
Wiji key
a.
Prerequisite
i.
The material is considered to be directly functional, the battery can be use directly
ii.
All indications contained in this document correspond to programming with Avelour in version
6.04 mini
b.
First step : Run Avelour and connect to the sensor to configure
After connection of the Wiji kit equiped with its antenna (or the Wiji key) on your laptop or PC USB port, run the
software Avelour version 6.04 minimum. Click on the button “Connect to a wireless device” then the sensor or
logger will be directly visible by its part number (SN) without the need to activate anything else (ex IJA0101-
0000 3559). Locate the sensor's serial number (SN) on the sensor label and click "OK".
On the first connection with the sensor only the serial number will appear. The following connections you will
see also the name of the installation site or another name that you define.
