background image

ENGLISH

4  BEFORE YOU OPERATE THE MONITOR

The following accessories are included in your package. Check to see if they are enclosed with 
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional 

iiyama office.

*

The rating of  the Power Cable enclosed in 120V area is 10A/125V. If you are using  
a power supply higher than this rating, then a power cable with a rating of 10A/  
250V must be used. However, all guarantees and warranties are void for any    
problems or damage caused by a power cable not supplied by iiyama.

  An approved power cable greater or equal to H05VVF, 3G, 0.75mm

2

 must be used.

*

Accessory for ProLite XU2492HSU

 Power Cable*

1

 

 HDMI Cable 

 DisplayPort Cable

 USB Cable 

 Stand-Base with a screw 

 Stand-Neck*

2

 

  

 Cable Holder*

2

 

 Safety Guide 

 Quick Start Guide

  

                                  

BEFORE YOU OPERATE THE MONITOR

CHECKING THE CONTENTS OF THE PACKAGE

CAUTION

FEATURES

  Supports Resolutions up to 1920 × 1080

  High Contrast 1000:1 (Typical), Adv. Contrast Function Available / Brightness 

250cd/m

2

 (Typical) 

  Quick Response Time 4ms (Gray to Gray) 

  Blue Light Reducer    

 

 

  Digital Character Smoothing

  Automatic Set-up

  2 × 2W Stereo Speakers

  Power Management (VESA DPMS Compliant)

  VESA Mounting Standard (100mm×100mm) Compliant

  Keyhole for Security Lock

Summary of Contents for ProLite XU2492HSU






































Reviews: