ENGLISH
1600 × 1200
H : 7 5 . 0 K H z V : 6 0 . 0 H z
M e n u : 4
Menu : 4
(Analog)
Adjustment Item
Problem / Option Button to Press
Too soft
Too loud
Volume
Return to Menu
Highlight “Menu :4” again.
Reset
NO
YES
Return to Menu.
Factory-preset data is restored.
is displayed while
Mute
is active.
Analog
Digital
Select the Analog input (D-SUB).
Select the Digital input (DVI-D).
Signal Select
NOTE
Off
Mode 1
Mode 2
The picture is displayed at the optimum resolution.
Sretch the picture and keep the screen size ratio.
Sretch the picture to fit the full screen.
Full Screen
Adjust the screen size at resolutions of less than 1600 × 1200.When
selecting “1 ”or “2 ”displayed text or lines may be blurred, or brightness may not be uniform
when inputting stripe pattern signal or the like.
NOTE
Direct
Direct
Direct
You can skip the Menu pages and display an adjustment scale directly by using the following button
operations.
Volume:
Press the Volume Button when the Menu is not displayed.
Holding the Volume Button for 1-2 seconds will switch the Mute function between
ON and OFF.
Signal Select: Press the Input Button when the Menu is not displayed.
OPERATING THE MONITOR 17
Select either Analog or Digital for the signal input when both of the signal inputs are connected to
a signal source. Switch D-SUB and DVI-D whenever pressing the input button.
When only one of the two signal inputs is connected to the signal source, the one connected is
automatically selected. Input Button is not available if there is no signal input from the selected
connector or during the power management mode.
NOTE
